ECLER WiLD-SB18

  • Pick up from the Woodmart Store

To pick up today

Free

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

From $40

  • DHL Courier delivery

DHL courier will deliver to the specified address

1-2 Days

From $40

WiLD-SB18 is a compact 8″ self-powered subwoofer with wireless audio reception capability under the control of the WiLD-TX transmitter. The WiLD series is the ultimate long-distance wireless audio solution. Designed for commercial spaces, museums and other sectors, WiLD offers a cost-effective, robust and easy-to-use installation that integrates seamlessly into any environment. Enjoy superior sound quality with minimal visual impact. Upgrade to WiLD today and transform your audio experience.

  • Self-powered WiLD receiver for subwoofer, including 8″ woofer and bass reflex system.
  • Universal internal power supply (100-240 V AC 50-60 Hz).
  • 1 WiLD wireless audio signal received, from the transmitter to which it is paired.
  • 1 Unbalanced analog stereo signal line input. 3-pin Euroblock.
  • Controls on the rear panel for:
  • * WiLD pairing button that allows you to pair the receivers to the transmitter quickly and easily.
  • * LED indicator.
  • * Source selection (input).
  • * Low pass filter selection (40, 60, 80, 100, 120, 150, 200, 250 Hz, Full Range).
  • * StandBy selection (20min, 1.4 Hours, ON) .
  • * General volume control.
  • Recommended maximum range from a WiLD-TX transmitter to any WiLD paired receiver: 150 meters, with direct line of sight.

179,900.00

Description

  • Self-powered WiLD receiver for subwoofer, including 8″ woofer and bass reflex system.
  • Universal internal power supply (100-240 V AC 50-60 Hz).
  • 1 WiLD wireless audio signal received, from the transmitter to which it is paired.
  • 1 Unbalanced analog stereo signal line input. 3-pin Euroblock.
  • Controls on the rear panel for:
  • * WiLD pairing button that allows you to pair the receivers to the transmitter quickly and easily.
  • * LED indicator.
  • * Source selection (input).
  • * Low pass filter selection (40, 60, 80, 100, 120, 150, 200, 250 Hz, Full Range).
  • * StandBy selection (20min, 1.4 Hours, ON) .
  • * General volume control.
  • Recommended maximum range from a WiLD-TX transmitter to any WiLD paired receiver: 150 meters, with direct line of sight.

Frequency band

1880 – 1930MHz, EU DECT, US DECT

Coverage range

Up to 150m from a TX to any paired RX, direct line of sight

Audio channels

1 stereo audio ch received from the WiLD-TX network

Audio transmission

16 bit uncompressed, 48kHz SR

Digital Audio Sample size

16bit

Digital Audio Sampling rate

48kHz

Digital Audio Frequency Response

10Hz – 15kHz (-1dB)

Digital Audio converters

ADC Resolution: 24 bits
Dynamic range
ADC: 96 dB

Latency

From TX Analog Audio IN to RX Speaker <26ms

Pairing time

Up to 60s

SYSTEM

Effective Freq. Range

57Hz-693Hz (-10dB)

Sensitivity

92 dB (1W/1m)

Maximum SPL

112 dB continuous / 118 dB peak

TRANSDUCERS

Ways

1-way full range

Driver

8″ woofer

Nominal impedance

4Ω

POWERED

Power

100W RMS / 150W peak

Audio inputs

Wireless Audio: Digital, Mono
Line in: ST unbalanced 3-pin Euroblock

Audio outputs

Internal Loudspeaker: Analog, Mono, Self powered

THD + Noise

<1% @1Hz Full power

Signal Noise Ratio

>110dB @100W RMS

Input sensitivity

-8dBV / 10kΩ (wireless Audio)
-15 dBV / 10kΩ (line in)

ELECTRICAL

Power supply

Universal, internal power supply

AC mains requirement

100-240VAC @ 50-60Hz

AC mains connector

standard 2-pin AC plug

Power consumption

150W

Power consumption standby

<2W

Ventilation

Convection cooled

MONITORING AND CONTROL

Volume control

Led display, +/- volume buttons

Other controls

PAIR: via WiLD button
LP Filter: via volume buttons
StandBy: via volume buttons

LED Indicators

Status

Auto standby time

20min, 1H, 4H, On

Auto standby threshold

>50 dB

PHYSICAL

Installation options

Floor, Wall-mount brackets

Enclosure material

MDF

Mounting system

Metal brackets

Operating temperature

Min: -10°C; 14°F
Max: 40°C; 104°F

Operating humidity

<85% RH

Storage temperature

Min: -10°C; 14°F
Max: 50°C; 122°F

Storage humidity

<90% RH

Included accessories

1x EU AC voltage cord (3×1-1.5m), 1 UK AC voltage cord (3×1-1.5m), 4x wall screens, 4x wall plugs, 2x Wall-mount brackets, 12x screens.

Finished color

Black (RAL 9005)

Dimensions

450 x 193 x 360 mm / 17.72 x 7.60 x 14.17 in. (WxHxD)

Weight

9.1 kg/20.06 lb

Pieces per box

1 unit

Shipping dimensions

550 x 382 x 460 mm / 21.65 x 15.04 x 18.11 in. (WxHxD)

Shipping weight

11.5 kg/25.35 lb

Specification

Overview

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “ECLER WiLD-SB18”

Your email address will not be published. Required fields are marked *