Apertura – SWING – 2 Way, 2 Drive Units , Stand-mount Loudspeaker

SKU: N/A
  • Pick up from the Woodmart Store

To pick up today

Free

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

From $40

  • DHL Courier delivery

DHL courier will deliver to the specified address

1-2 Days

From $40

  • Frequency range : 48-40 000Hz/ +-3dB
  • Sensitivity : 87dB/2.83v/1m
  • Impedance : 8Ω
  • Load : bass-reflex
  • Drive units : 16 cm mid-woofer « Isotactic matrix », Dome tweeter (ring radiator) 25 mm
  • Crossover frequency : 3,5 kHz
  • Terminals :  Bananas
  • Dimensions :  190 x 310 x 280 mm (W x D x H)
  • Weight : 7,6kg net

345,600.00

Description

DRIVE UNITS

  • A 16cm mid/woofer with an « isotactic matrix », cone like in Armonia, Edena and their big sisters.  This material made of woven polypropylene strips, combines stiffness, lightness and good damping properties.
  • The long moving coil allows a long linear excursion. Which is quite amazing for a speaker of this size.
  • This drive unit comes also with an original suspension, featuring radial stiffeners that lower the interferences.
  • High frequencies are reproduced by a tweeter, member of the famous “Ring Radiator” family.
  • In addition to its unusual profile, it has a bullet shape waveguide and a rear damping chamber. The result is an extended frequency response, both at the top end (to above 40kHz), and at the bottom end to allow easier coupling with the bass/mid range drive unit.

CROSSOVER

  • High frequencies are reproduced by a tweeter, member of the famous “Ring Radiator” family.
  • In addition to its unusual profile, it has a bullet shape waveguide and a rear damping chamber. The result is an extended frequency response, both at the top end (to above 40kHz), and at the bottom end to allow easier coupling with the bass/mid range drive unit.
  • Proprietary « DRIM » structure with a triple attenuation slopes
  • This technology cancels intermodulation on each sections of the crossover, which result in unsurpassed clarity and resolution
  • Same high level component qualities as in Sensa
  • Each set of drive units (tweeter and mid/woofer) are individually measured and crossover values adjusted according to these measurements sets.
  • Hand wiring on a 140 µm copper printed circuit board.
  • Optimized crossover structure to avoid magnetic interference between components

ENCLOSURE

  • The main goal, with this new cabinet design, was to limit vibration propagation on the most critical panels (especially on the back panel).
  • High thickness panels (18mm)
  • Internal dual cavities framework with one bracing panel to stiffen the structure and create very specific areas where damping materials can be applied
  • Optimized bass reflex loading allowing reproduction of low frequencies, uncommon for such a size speaker.
  • Importance is given to damping treatment to cancel any standing waves. We are using 2 different types of dumping materials
  • 1 standard finish available :
    • High Gloss : Piano black, White

Magnetic grid with invisible fixation

Swing can be set on most of the stands available on the market

 

Specification

Overview

ColourLight Oak (Satin), American Walnut (Satin), White (High Gloss), Piano Black (High Gloss)

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Apertura – SWING – 2 Way, 2 Drive Units , Stand-mount Loudspeaker”

Your email address will not be published. Required fields are marked *