Apertura – ARMONIA Evolution – 2 Way, 2 Drive Units, Floor-Standing Loudspeaker

SKU: N/A
  • Pick up from the Woodmart Store

To pick up today

Free

  • Courier delivery

Our courier will deliver to the specified address

2-3 Days

From $40

  • DHL Courier delivery

DHL courier will deliver to the specified address

1-2 Days

From $40

  • Frequency range : 37-30 000Hz/ +-3dB
  • Sensitivity : 87dB/2.83v/1m
  • Impedance : 8Ω
  • Load : bass-reflex
  • Drive units : 18 cm mid-woofer « Isotactic matrix », Ribbon tweeter 8×120 mm
  • Crossover frequency : 2,8 kHz
  • Terminals :  single wire binding posts (spades or Bananas)
  • Dimensions :  205 x 291 x 1030 mm (W x D x H), with stands : 292 x 291 x 1069 mm
  • Weight : 22,2kg net – 22kg (packed)

936,960.00

Description

DRIVE UNITS

  • 18 cm mid/woofer “isotactic matrix” – a woven polypropylene composite cone. This material combines stiffness, lightness and good damping properties.
    Long voice coil for a high linear excursion
  • New generation of ribbon tweeter, using a flat metalized polymer diaphragm.
    Its emissive area is twice that of the Armonia tweeter. A double surface will reduce the movements of the ribbon, and thus the distortion.
    The result is an increase dynamic capacity and a higher resolution

CROSSOVER

  • Proprietary « DRIM » structure with a triple attenuation slopes and phase control over the entire bandwidth.
  • A brand new crossover for the Armonia Evolution with two independent circuits boards for low-pass and High-pass sections.
    Selection of very high end capacitors.
  • Each set of drive units (tweeter and mid/woofer) are individually measured and crossover values adjusted according to these sets measurements.
  • Hand wiring on a 140 µm copper printed circuit board.
  • Optimized crossover structure to avoid magnetic interference between components
  • Bornier en cuivre pur, plaqué argent.

ENCLOSURE

  • This new model uses the Apertura very specific cabinet shape: two curved sides of different length and no parallel front and back panels.
  • Laminar structure based on multiple thin layers pressure molded.
    Such process creates breaking modes and limit propagation of vibrations.
  • Internal multi-cavity framework to stiffen the structure and create very specific areas where damping materials can be applied.
  • Importance is given to damping treatment to cancel any standing waves. We are using 3 different types of dumping materials.
  • Mechanical grounding: a central cone positioned on the axis of the center of gravity improved vibrations transfer to the floor.
  • New aluminum stands and spikes available. Choice of 2 anodized colors: black or silver.
  • 5 differents standard finishes available :
    • Satin : light oak, american walnut
    • High Gloss : rosewood, figured maple, piano black, white

Specification

Overview

ColourFigured Maple, Light Oak (Satin), American Walnut (Satin), Rosewood (High Gloss), White (High Gloss), Piano Black (High Gloss)

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Apertura – ARMONIA Evolution – 2 Way, 2 Drive Units, Floor-Standing Loudspeaker”

Your email address will not be published. Required fields are marked *